Impact Windows & Doors in Margate, FL

Margate is an inland city in northern Broward County, about 7.5 miles from the Atlantic Ocean, with roughly nine square miles of tree-lined streets and about 30 miles of canals. It became a town in 1955 and a city in 1961, and its name is said to combine founder Jack Marqusee's surname with its early role as a gateway to western Broward. America's Window & Door installs hurricane impact windows, impact-rated doors, and commercial storefront systems across Margate, with permit-ready work built to the Florida Building Code.

Hurricane Impact Windows in Margate

Margate's inland location does not lower the bar for its homes. Because Broward is part of the High-Velocity Hurricane Zone, replacement windows here must meet the same impact-testing and Florida Building Code requirements as windows in the county's coastal cities. Impact windows are built to withstand wind-borne debris and sudden pressure changes, helping keep your home sealed and your household safer as a storm passes.

Impact glass also pays off outside of hurricane season. Laminated impact glass, especially with a Low-E coating, can reduce solar heat gain, cut down on noise from busy roads like State Road 7 and Atlantic Boulevard, and resist forced entry better than standard single-pane windows. For residents of Margate's condominium and 55-plus communities, where an association often reviews exterior work, permanent impact glass also eliminates the seasonal chore of putting up and taking down shutters.

Single Hung Impact Windows in Margate

For Margate homeowners replacing several windows at once, single hung impact windows offer certified storm protection at a practical price point. We carry them in a wide range of sizes for the standard openings found in the city's ranch-style houses, such as the single-story homes of Paradise Gardens, a community of roughly 1,800 homes built between 1969 and 1982.

Frame colors can coordinate with the stucco and tile exteriors common across Broward County, so the house looks clean and consistent once the new units are in. Single-hung windows are also among the quicker styles to permit and install, which keeps disruption low for Margate families replacing windows room by room or all at once.

Double Hung Impact Windows in Margate

Margate homeowners who want better airflow and easier upkeep often look at double hung impact windows. Both the upper and lower sashes open independently, so warm air can escape at the top while fresher air comes in below. That flexibility is useful during South Florida's milder winter months, when opening the windows can feel better than running the air conditioning.

Each sash tilts inward, so you can clean the outside of the glass from indoors without a ladder. With several frame profiles and glass tint options, double-hung units work well in older homes around Margate and in more recently remodeled houses.

Architectural and Custom Impact Windows in Margate

Some Margate homes, especially remodels and newer builds, have arched transoms, oversized fixed glass, or openings that stock units such as double-hung windows simply cannot fill. Our architectural impact windows are made to each project's exact dimensions and shapes, and they carry Miami-Dade NOA approvals just like our standard product lines.

We work directly with Margate homeowners, builders, and architects to select and install custom configurations, whether the job is a single large picture window or a complete window package for a new home. Our team handles product specification, the permit application with the City of Margate Building Department, installation, and final inspection, so the whole project runs through a single point of contact.

Sliding Glass Doors in Margate

Sliding glass doors are part of daily life in many Margate homes, opening onto patios, screened porches, and backyards, and in canal-front houses, onto the water view. Our impact sliding glass doors replace aging aluminum sliders with laminated glass systems rated for Broward County's High-Velocity Hurricane Zone wind loads, so you don't need storm panels or accordion shutters each season or to block the view.

Configurations run from a standard two-panel slider to wide multi-panel and pocket systems, all with heavy-duty rolling hardware made for dependable operation in Margate's heat and humidity. Frames come in white, bronze, and custom colors to match the mix of exterior styles found across the city's neighborhoods.

Impact-Rated Entry Doors in Margate

In Margate, exterior doors meet the same Florida Building Code wind-load and impact standards as windows, and the front door is usually the first thing a visitor notices. America's Window & Door installs impact-rated entry doors that add storm resistance while giving a Margate home's entrance a cleaner, more updated look.

Door styles range from simple contemporary designs to traditional raised-panel doors, so there is a good match for an original Margate home as well as a recently updated townhome. Every installation includes a properly set threshold, new weatherstripping, and upgraded multi-point hardware.

Double Entry Doors in Margate

Homes with wider front entries are a natural fit for our double entry doors. These paired units offer a choice of decorative glass inserts and panel layouts, use multi-point locking hardware, and meet Florida Building Code impact requirements for Broward County, giving a Margate home a secure, balanced entrance.

Fiberglass Entry Doors in Margate

Margate homeowners who like the appearance of wood but not the upkeep should take a close look at fiberglass entry doors. Fiberglass resists the warping, swelling, and finish breakdown that South Florida's heat and humidity can cause in wood and steel doors. The impact-rated models we install are tested and approved under the Florida Building Code, pairing storm protection with a durable, low-maintenance finish.

Commercial Impact Windows and Storefront Systems in Margate

State Road 7 and Atlantic Boulevard are Margate's primary commercial corridors, and the city is planning a mixed-use City Center on roughly 50 acres near State Road 7 and Margate Boulevard. For businesses along these roads, our commercial impact window and storefront systems meet the Florida Building Code's wind-load requirements for commercial buildings in Broward County, and we coordinate each project through the City of Margate's permitting process.

Commercial clients in Margate get the full scope of work from one team: site assessment, product specification, permit filing, installation, and final inspection. Our storefront systems meet current Florida Building Code wind-load requirements while giving retail, office, and restaurant spaces the clean, professional look their customers expect.

Impact Window and Door Repair Services in Margate

When a storm, accident, or years of daily use damages impact windows or doors in a Margate home, our team provides impact window and door repair services to restore proper function. We handle glass panel replacement, frame repair, seal restoration, hardware replacement, and screen repair on most major product brands.

Every Margate repair call starts with a straightforward assessment. Our technicians weigh the extent of the damage, the unit's age, and the long-term cost before recommending a repair or replacement. In many cases, a targeted repair restores a window or door to proper performance for less than the cost of replacing the entire unit.